E-Mat Heavy Duty Access Mats are manufactured from 100% recycled High Density Polyethylene (HDPE) and are weight tested to a maximum load of 80 tonnes, on hard standing areas or firmer ground they can take, and have been weight tested up to 120 tonnes. These mats are ideal for both short and long term projects providing access for both heavy
Our ground protection mats are designed especially for the toughest kinds of work, offering a stable surface that can be reused again and again. They are made of a special high density material which helps spread the load and can take many knocks. Create temporary roadways with our mats:
20mm thick yellow ground access mats factory-HDPE road . 20mm thick yellow ground access mats export-HDPE Ground industrial Ground nstruction mats 20mm thick for civil industrial ground access mats 20-50 mm for Lawns protection 20 mm (1) 1/8 inch (5) 1/4 inch (29) 3/8 inch (101) 1/2 inch (33) 9/16 inch (45) Crane Outrigger Pads Made from UHMWPE (ultra high molecular weight polyethylene) and are
Ground protection mats are so easy to use and will save you a ton of money by avoiding damage and saving time getting trucks unstuck. These mats can carry up to 80 ton so weight is not an issue. We clean the mats with a water blaster between rentals however we do ask that you please hose off any large chunks of mud or clay before returning them.
20-50 mm pink Ground protection mats 80 tons load capacity California bearing ratio typical values - CBR Testing UK Sep 14, 2017 · A CBR value of 2% is usually found for clay, high-quality sub-base will have CBR values between 80% and 100%, and some sands may have values around 10%.
20-50 mm ground protection boards 100 T load capacity 2’x8′ blue ground protection boards 100 tons load capacity That means the total width of the first supported load area extends from the end of the beam to the 3.25′ mark along the beam (1.5′ + 1.75′). 15mm thick green ground protection boards 80 tons load []
20mm thick tan Ground protection mats 80 tons load capa [] IN STOCK! - 4x8 Black Mats. Our ground protection mats made from 100% recycled high-density polyethylene (HDPE), can hold up to 100 tons and are tough enough to not break. Mats have cleats and textured tops to aid with helping the vehicles move smoothly on the temporary road. Feature
20-50 mm Ground nstruction mats 80 tons load capacity . ground protection boards 2×8 80 tons load capacity scot [] IN STOCK! - 4x8 Black Mats. Our ground protection mats made from 100% recycled high-density polyethylene (HDPE), can hold up to 100 tons and are tough enough to not break.
ground protection boards 1/2 Inch 100 tons load capacity Canada 20-50 mm ground protection boards 100 T load capacity 22 in green ground access mats 100 T load capacity-HDPE 4×8 Liberty Mat, black, 77lbs, 4′ x 8′ x .5″. virtually eliminate damage to lawns and landscaped areas and provide traction for vehicles operating in mud []
20-50 mm yellow ground access mats 80 T load capacity . 1250x3100mm yellow ground protection boards 60 T load c [] IN STOCK! - 4x8 Black Mats. Our ground protection mats made from 100% recycled high-density polyethylene (HDPE), can hold up to 100 tons and are tough enough to not break.
large size Ground nstruction mats 20-50 mm for apron-HDPE Ground Protection Mats Temporary nstruction Site They range in size from 6 to 8 feet long ways and 2 to 4 feet in width. Most are 1/2 inch thick. Depending upon their size, these weigh between 33 and 86 pounds. Many of our heavy duty Rubber Mats: Large & Thick, Indoor & Outdoor Home &
20-50 mm ground protection boards 60 T load capacity 20-50 mm brown ground protection boards 80 tons load capacity 1220*2440mm tan ground protection boards for heavy equipment 1220*2440mm red ground protection boards 80 tons load capacity. 1220*2440mm 6000x2000mm Thickness: 12.7mm,15mm, 18mm, 20mm, 25mm, 28mm, 30mm Cleat height:
These ground protection mats feature a power cylinder tread surface for maximized traction. Ours can handle loads up to 90 tons. They mold to the ground, thanks to their flexible makeup. Weather changes don't affect the materials. If mait use of cranes and other large pieces of gear, our Outrigger Pads are a sound investment. These pads are
20-50 mm brown ground protection boards 80 tons load capacity 1220*2440mm tan ground protection boards for heavy equipment 1220*2440mm red ground protection boards 80 tons load capacity. 1220*2440mm 6000x2000mm Thickness: 12.7mm,15mm, 18mm, 20mm, 25mm, 28mm, 30mm Cleat height: 5mm, mmon lor: Black/Blue/Tan (other lors available, MOQ 5 Tons) 2
6000×2000 blue ground access mats 100 tons load capacity China Anti Slip Polyethylene HDPE Ground Mat 80 Ton Capacity After-sales Service: 20 Years Warranty: 3 Years Material: PE Kind: Engineering Plastic Sheet Water HENAN OKAYorption: <0.01% ntraction Percentage: 0.4%~1.4% 6000×2000 yellow ground access mats 100 tons load capacity The hdpe
The HDPE Outrigger PadSR keeps the machine running safely HDPE OuTrigger Pads are used under the support legs of automotive cranes, crawler cranes, movable arm pumps, concrete pumps, fire trucks, multi-purpose trucks, tree trimmers, and any type of aerial equipment.Make the machine work safely
HDPE ground protection mat
Size:1220*2440mm(4’*8′)、610*2440mm(2’*8′)、910*2440mm(3’*8′)、910*1830mm(3’*6′)
610*1830mm(2’*6′)、610*1220mm(2’*4′)
thickness:10mm-12.7-15mm
Color:Double-sided pattern, black, red, white, blue, green and brown, etc
Material: High density polyethylene(HDPE)
Density:0.94-0.96
water absorption:<0.01%
pressive strength:≥27Mpa
Size:1220*2440mm(4’*8′)、610*2440mm(2’*8′)、910*2440mm(3’*8′)、910*1830mm(3’*6′)
610*1830mm(2’*6′)、610*1220mm(2’*4′)
thickness:10mm-12.7-15mm
Color:Double-sided pattern, black, red, white, blue, green and brown, etc
Material: High density polyethylene(HDPE)
Density:0.94-0.96
water absorption:<0.01%
pressive strength:≥27Mpa
UHMWPE board description
This natural UHMWPE 1000 board is used where sliding abrasion occurs or where metal parts meet, causing friction or abrasion wear. It is excellent for chute and hopper liners, convey or components, wear pads, machine guides, impact surface and guide rails.
Bridge support skateboard / wear plate features:
The bridge support skateboard/wear plate is an ultra-high molecular weight polyethylene plate embedded in the plate basin support. Due to the low friction coefficient of the ultra-high molecular weight polyethylene plate, the beam end can be free on the surface of the ultra high molecular weight polyethylene plate. Sliding, horizontal displacement is not limited, especially suitable for medium and small loads, large displacement bridges;