black hdpe boards cut to size-HDPE high density polyethylene Cut-to-Size HDPE Cutting Board Sheet – Okay, Inc. Select Hole Sizes 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 7/16″ 1/2″ 9/16″ Email : okay@chinaupe.com
They range in size from 6 to 8 feet long ways and 2 to 4 feet in width. Most are 1/2 inch thick. Depending upon their size, these weigh between 33 and 86 pounds. Many of our heavy duty ground protection mats have two surface options: cleated or smooth. These may both be incorporated into one design.
Discount nstruction ground polyethylene access boards . 3/4 Inch ground access mats 100 tons load capacity 22 in green ground access mats 100 T load capacity-HDPE 4×8 Liberty Mat, black, 77lbs, 4′ x 8′ x .5″. virtually eliminate damage to lawns and landscaped areas and provide traction for vehicles operating in mud or sand. ‘ heavy
cut to size nstruction ground access boards They range in size from 6 to 8 feet long ways and 2 to 4 feet in width. Most are 1/2 inch thick. Depending upon their size, these weigh between 33 and
cut to size bog ground polyethylene access boards Cuttingboards.net – 1/2″ White Poly Cutting Board – A Cut Size: These boards can be cut to the exact size you need. Note for example: If the short side is 10 1/2″ and the long side is 16″, you will select “10” as the “short side”, then “1/2” as the “short side fraction”.
Cut-To-Size Amber Bamboo Cutting Boards; Cut-To-Size Natural Bamboo Cutting Boards; Cut-To-Size Bamboo Pull Out Boards; Cut-To-Size Bamboo Round Cutting Boards; Pull Out Boards. Cut-To-Size Plastic Pull Out Boards; Cut-To Size Heat Resistant Pull Out Boards; Cut-To-Size Bamboo Pull Out Boards; Wood Boards. John Boos Cutting Boards; Teakhaus
1" White HDPE Sheet Cut-to-Size HDPE (High Density Polyethylene) has a ntinuous use temperature range of -50°F (-46°C) to 180°F (82°C). It is a standard material and offers high impact strength, high chemical resistance, and very low water HENAN OKAYorption.
We can cut any size material in any quantity. From a single sheet to 100 or more, OKAY Plastics has the cut-to-size capabilities to help businesses in any industry. In many cases, purchasing cut-to-size rectangles of plastic sheet saves time, money, and delivery sts mpared with buying full sheets of material or cutting them in-house.
cut to size bog ground polyethylene access boards. Cuttingboards.net – 1/2″ White Poly Cutting Board – A Cut Size: These boards can be cut to the exact size you need. Note for example: If the short side is 10 1/2″ and the long side is 16″, you will select “10” as the “short side”, then “1/2” as the “short side fraction
heavy duty ground protection boards 12mm thick for nstructionTemporary Access and Ground Protection Mats provide short and long term access, E-Mat Heavy Duty Access Mat Double S
Size: These boards can be cut to the exact size you need. Note for example: If the short side is 10 1/2" and the long side is 16", you will select "10" as the "short side", then "1/2" as the "short side fraction". Then choose "16" as the "long side" and "0/16" as the "long side fraction".
Ground Protection Mats Temporary nstruction Site Equipment They range in size from 6 to 8 feet long ways and 2 to 4 feet in width. Most are 1/2 inch thick. Depending upon their size, these weigh between 33 and 86 pounds. Many of our heavy duty ground protection mats have two surface options: cleated or smooth.
PLASTIC LUMBER PLASTIC BOARDS RECYCLED PLASTIC BOARDS Plastic lumber requires very little maintenance and is easier to clean than traditional wood, lor throughout. Resistant + 8619937373622
high quality ground access mats 2’*4′ for heavy equipment 2 inch heavy equipment ground plastic ver boards 3/4 Inch ground access mats 100 tons load capacity 22 in green ground access mats 100 T lo
customized size ground protection boards 4×8 for architecture 4×8 hdpe boards cut to size-HDPE high density polyethylene Custom Fl Sheets. We carry 4’ x 8’ sheets in stock in both white and black. Thickness ranges from 1/16” to 1/2” thick. Custom cutting is available.
The HDPE Outrigger PadSR keeps the machine running safely HDPE OuTrigger Pads are used under the support legs of automotive cranes, crawler cranes, movable arm pumps, concrete pumps, fire trucks, multi-purpose trucks, tree trimmers, and any type of aerial equipment.Make the machine work safely
HDPE ground protection mat
Size:1220*2440mm(4’*8′)、610*2440mm(2’*8′)、910*2440mm(3’*8′)、910*1830mm(3’*6′)
610*1830mm(2’*6′)、610*1220mm(2’*4′)
thickness：10mm-12.7-15mm
Color：Double-sided pattern, black, red, white, blue, green and brown, etc
Material： High density polyethylene(HDPE)
Density：0.94-0.96
water absorption：＜0.01％
pressive strength：≥27Mpa
Size:1220*2440mm(4’*8′)、610*2440mm(2’*8′)、910*2440mm(3’*8′)、910*1830mm(3’*6′)
610*1830mm(2’*6′)、610*1220mm(2’*4′)
thickness：10mm-12.7-15mm
Color：Double-sided pattern, black, red, white, blue, green and brown, etc
Material： High density polyethylene(HDPE)
Density：0.94-0.96
water absorption：＜0.01％
pressive strength：≥27Mpa
UHMWPE board description
This natural UHMWPE 1000 board is used where sliding abrasion occurs or where metal parts meet, causing friction or abrasion wear. It is excellent for chute and hopper liners, convey or components, wear pads, machine guides, impact surface and guide rails.
Bridge support skateboard / wear plate features:
The bridge support skateboard/wear plate is an ultra-high molecular weight polyethylene plate embedded in the plate basin support. Due to the low friction coefficient of the ultra-high molecular weight polyethylene plate, the beam end can be free on the surface of the ultra high molecular weight polyethylene plate. Sliding, horizontal displacement is not limited, especially suitable for medium and small loads, large displacement bridges;
