digger temporary trackway 12mm thick for foundation works SECTION 323119 - Digger Specialties Inc. - Digger Specialties Dual-Ring Sets: Sets mposed of 2 cast aluminum rings, 3.600 inches (90 mm) in diameter and 0.50 inch (12 mm) thick, mechanically attached.
Our ground protection mats made from 100% recycled high-density polyethylene (HDPE), can hold up to 100 tons and are tough enough to not break. Mats have cleats and textured tops to aid with helping the vehicles move smoothly on the temporary road. Feature. Support 100 tons of load; Using solid 12.7mm thick HDPE material; Bold cleat design for
Temporary roadway mats are available in many designs. Different ground protection syste are suitable for different surfaces. Moreover, it also depends on which nstruction equipment and vehicles drive over the ground ver. Similarly, their size and weight loads also matter.
heavy duty ground access mats 12mm thick for architecture Withstands loads up to 80 tonnes, Pro-Tech Mats are the ultimate fast to-install temporary access and ground protection mat for moving and operating plant equipment and personnel over soft or sensitive ground.
vehicle temporary road way 12mm thick for foundation works. Our ground protection mats made from 100% recycled high-density polyethylene (HDPE), can hold up to 100 tons and are tough enough to not break. Mats have cleats and textured tops to aid with helping the vehicles move smoothly on the temporary road. Feature.
Double-sided pattern temporary road track 12.7mm thick for At 12mm thick each Medium Duty Access Mat is capable of tait weights of 15-20 tonnes depending on the ground nditions, mait Get Price >> large pattern Ground protection mats 12mm thick for civil Engineering
vehicle temporary road way 12mm thick for swamp ground-Ground Withstands loads up to 80 tonnes, Pro-Tech Mats are the ultimate fast to-install temporary access and ground protection mat for moving and operating plant equipment and personnel over soft or sensitive ground. Amazingly Tough & Flexible.
vehicle temporary road mats 3×8 ft for soft ground-High . good quality temporary driveway mats 3×8 ft for architecture Apr 30, 2022 · The ultimate US-made lawn protection mat. This is the "Gold Standard" of temporary ground protection mats suitable for all vehicles, heavy equipment, or foot traffic.
A road plate is a large, flat surface that provides temporary vering over streets, allowing the flow of pedestrians and traffic to remain unbothered. Road plates can allow heavy machinery to pass over potholes and rough terrain, protecting the jobsite and preventing damage to equipment.
wear resist Ground protection mats 12mm thick for foundation Temporary Access Mats – Ground Protection For Soft henan okay Heavy Duty Ground Protection Mat – 2400mm x 1200mm x 12mm – 36kg The henan okay is a high-quality Ground Protection and Temporary Access Mat designed as a functional ac.. £138.50 (ex. VAT) £166.20 (inc .VAT) []
Our ground protection mats made from 100% recycled high-density polyethylene (HDPE), can hold up to 100 tons and are tough enough to not break. Mats have cleats and textured tops to aid with helping the vehicles move smoothly on the temporary road. Feature. Support 100 tons of load; Using solid 12.7mm thick HDPE material
natural Ground protection mats 12mm thick for foundation works IN STOCK! - 4x8 Black Mats. Our ground protection mats made from 100% recycled high-density polyethylene (HDPE), can hold up to 100 tons and are tough enough to not break. Mats have cleats and textured tops to aid with helping the vehicles move smoothly on the temporary road. Feature.
professional ground protection boards 12mm thick for nstruction HDPE ground protection boards 12.7mm thick for apron-HDPE The tough 12.7mm thick polyurethane mats don’t HENAN OKAYorb heat when vering sensitive areas; The 2.44m x 1.22m Mats / panels can be laid in two parallel tracks for temporary road use, laid as one roadway 3.66m wide or laid to form par or turning areas.
large size temporary road panel 12.7mm thick for foundation works . outdoor plastic road plates 12.7mm thick for foundation [] IN STOCK! - 4x8 Black Mats. Our ground protection mats made from 100% recycled high-density polyethylene (HDPE), can hold up to 100 tons and are tough enough to not break.
lightweight temporary road mats 12.7mm thick for civil Engineering long life ground access mats 12.7mm thick for nstruction12.7mm thick ground access mats for civil Engineering equipped with BK-7 g Our ground protection mats made from 100% recycled high-density polyethylene (HDPE), can hold up to 100 tons and are tough enough to not break.
The HDPE Outrigger PadSR keeps the machine running safely HDPE OuTrigger Pads are used under the support legs of automotive cranes, crawler cranes, movable arm pumps, concrete pumps, fire trucks, multi-purpose trucks, tree trimmers, and any type of aerial equipment.Make the machine work safely
HDPE ground protection mat
Size:1220*2440mm(4’*8′)、610*2440mm(2’*8′)、910*2440mm(3’*8′)、910*1830mm(3’*6′)
610*1830mm(2’*6′)、610*1220mm(2’*4′)
thickness:10mm-12.7-15mm
Color:Double-sided pattern, black, red, white, blue, green and brown, etc
Material: High density polyethylene(HDPE)
Density:0.94-0.96
water absorption:<0.01%
pressive strength:≥27Mpa
Size:1220*2440mm(4’*8′)、610*2440mm(2’*8′)、910*2440mm(3’*8′)、910*1830mm(3’*6′)
610*1830mm(2’*6′)、610*1220mm(2’*4′)
thickness:10mm-12.7-15mm
Color:Double-sided pattern, black, red, white, blue, green and brown, etc
Material: High density polyethylene(HDPE)
Density:0.94-0.96
water absorption:<0.01%
pressive strength:≥27Mpa
UHMWPE board description
This natural UHMWPE 1000 board is used where sliding abrasion occurs or where metal parts meet, causing friction or abrasion wear. It is excellent for chute and hopper liners, convey or components, wear pads, machine guides, impact surface and guide rails.
Bridge support skateboard / wear plate features:
The bridge support skateboard/wear plate is an ultra-high molecular weight polyethylene plate embedded in the plate basin support. Due to the low friction coefficient of the ultra-high molecular weight polyethylene plate, the beam end can be free on the surface of the ultra high molecular weight polyethylene plate. Sliding, horizontal displacement is not limited, especially suitable for medium and small loads, large displacement bridges;