1.8mx 0.9m red ground access mats seller-HDPE road protection Product Features: Access Mats are 5" thick x 8' wide x 14' long with 3-10" fingers which align with pockets in the adjoining mats. All bolt ends are flush with bottom of mat - 3/8" carriage bolts with 1" flange nuts. Bottom edge is bevelled for easy pick up by zoom boom forks on site.
wear resist Ground protection mats 1.8mx 0.9m for swamp The 1.8m x 0.9m product is designed to accommodate most access platfor, mini-excavators and similar-sized plant equipment. Featuring integrated handles and weighing just 24kg, it is light enough for one person to safely lift and position.
wear resist temporary ground protection 2’*4′ for Lawns protection wear resist Ground protection mats for Lawns protection Weather-proof and durable, ground protection mats are a st-effective alternative to traditional plywood.
large pattern temporary ground protection 1.8mx 0.9m for They range in size from 6 to 8 feet long ways and 2 to 4 feet in width. Most are 1/2 inch thick. Depending upon their size, these weigh between 33 and 86 pounds. Many of our heavy duty ground protection mats have two surface options: cleated []
lightweight Ground protection mats 1.8mx 0.9m for heavy The 1.8m x 0.9m product is designed to accommodate most access platfor, mini-excavators and similar-sized plant equipment. Featuring integrated handles and weighing just 24kg, it is light enough for one person to safely lift and position.
1.8mx 0.9m red ground access mats seller-HDPE road protection Product Features: Access Mats are 5" thick x 8' wide x 14' long with 3-10" fingers which align with pockets in the adjoining mats. All bolt ends are flush with bottom of mat - 3/8" carriage bolts with 1" flange nuts.
After 4 h at ncentrations of 33.3 or 50%, 1st-day survival rate for all mobile stages was 45.3 or 36.0%, respectively, whereas after 8 or 16 h treatments, all values were decreased to zero. Seedlings of four major host plants of TSSM (cucumber, eggplant, rape, green peppers) were damaged to varying degrees after 24 h at the three
wear resist Ground protection mats 1.8mx 0.9m for swamp The 1.8m x 0.9m product is designed to accommodate most access platfor, mini-excavators and similar-sized plant equipment. Featuring integrated handles and weighing just 24kg, it is light enough for one person to safely lift and position.
Ground protection matting from offers safe and reliable temporary access pathways, roadways, and worit platfor in a wide range of environments. Whether you are looit for temporary access for heavy-duty vehicles in industrial worksites or need to protect yards from being damaged by equipment, has ground mating solutions
digger temporary trackway 1.8mx 0.9m for Lawns protectionsingle-sided pattern temporary road way 1.8mx 0.9m for heavy equipment digger ground protection boards 1.8mx 0.9m for civi
wear resist temporary road mats 1.8mx 0.9m for apron-Source 1.8mx 0.9m red ground access mats seller-HDPE road protection Product Features: Access Mats are 5" thick x 8' wide x 14' long with 3-10" fingers which align with pockets in the adjoining
Temporary driveway mats » wear resist plastic ground protection boards 1.8mx 0.9m for Lawns protection. wear resist plastic ground protection boards 1.8mx 0.9m ...
1.8mx 0.9m ground access mats application uae 1.8mx 0.9m ground protection boards application Mexico [] IN STOCK! – 4×8 Black Mats. Our ground protection mats made from 100% recycled high-density polyethylene (HDPE), can hold up to 100 tons and are tough enough to not break. Mats have cleats and textured tops to aid with helping []
wear resist ground access mats 3×8 ft for swamp ground Top Features for Mat-Pak Ground Protection temporaryMat 3×8 ft Black. Leaves turf smooth even in soft soil nditions. Tough 1/2 inch thick
1.8mx 0.9m red ground access mats seller-HDPE road protection Product Features: Access Mats are 5" thick x 8' wide x 14' long with 3-10" fingers which align with pockets in the adjoining mats. All bolt ends are flush with bottom of mat - 3/8" carriage bolts with 1" flange nuts.
The HDPE Outrigger PadSR keeps the machine running safely HDPE OuTrigger Pads are used under the support legs of automotive cranes, crawler cranes, movable arm pumps, concrete pumps, fire trucks, multi-purpose trucks, tree trimmers, and any type of aerial equipment.Make the machine work safely
HDPE ground protection mat
Size:1220*2440mm(4’*8′)、610*2440mm(2’*8′)、910*2440mm(3’*8′)、910*1830mm(3’*6′)
610*1830mm(2’*6′)、610*1220mm(2’*4′)
thickness：10mm-12.7-15mm
Color：Double-sided pattern, black, red, white, blue, green and brown, etc
Material： High density polyethylene(HDPE)
Density：0.94-0.96
water absorption：＜0.01％
pressive strength：≥27Mpa
Size:1220*2440mm(4’*8′)、610*2440mm(2’*8′)、910*2440mm(3’*8′)、910*1830mm(3’*6′)
610*1830mm(2’*6′)、610*1220mm(2’*4′)
thickness：10mm-12.7-15mm
Color：Double-sided pattern, black, red, white, blue, green and brown, etc
Material： High density polyethylene(HDPE)
Density：0.94-0.96
water absorption：＜0.01％
pressive strength：≥27Mpa
UHMWPE board description
This natural UHMWPE 1000 board is used where sliding abrasion occurs or where metal parts meet, causing friction or abrasion wear. It is excellent for chute and hopper liners, convey or components, wear pads, machine guides, impact surface and guide rails.
Bridge support skateboard / wear plate features:
The bridge support skateboard/wear plate is an ultra-high molecular weight polyethylene plate embedded in the plate basin support. Due to the low friction coefficient of the ultra-high molecular weight polyethylene plate, the beam end can be free on the surface of the ultra high molecular weight polyethylene plate. Sliding, horizontal displacement is not limited, especially suitable for medium and small loads, large displacement bridges;
